![]() |
|
|
|
how to get moisture out from under my home
Posted by: chill69 (IP Logged)
Date: March 30, 2008 09:38PM I have noticed that water, in the form of a soggy foundation, has collected under my double wide. I smell mold in my bath room. After investigating under my home, I found that I could smash a ruler up to 2 feet into the ground, just under where my bathroom sits. I want to save my home, but don't know what to do first. Can anyone instruct me? Re: how to get moisture out from under my home
Posted by: rbonnie (IP Logged)
Date: March 31, 2008 09:47AM Sounds like you have a plumbing leak, either in a supply line, or a drain line. Open the bottom board to investigate, under the bathroom, being careful in cutting the bottom board, so that it can be patched back when the repair is completed. If this is the case, the bottom board may be sagged down at this location, and you can feel the water weight from the crawl space. Re: how to get moisture out from under my home
Posted by: David Oxhandler (IP Logged)
Date: March 31, 2008 10:43AM To get a better idea of how to fix the probelm when you find it read the free article Understanding and Installing Manufactured Housing Waterlines David Oxhandler webmaster@mobilehome.com Re: how to get moisture out from under my home
Posted by: chill69 (IP Logged)
Date: April 01, 2008 06:04PM thank you for your prompt attention to my post. after further investigation,
i have found that the moisture collecting under my home is not a matter of plumbing, but of ground water drainage and standing water on the front of my home. i have had a professional come look at it and i have no clear answer on what to do, as it seems major grading and land sculpting must be done. thankx. Re: how to get moisture out from under my home
Posted by: David Oxhandler (IP Logged)
Date: April 01, 2008 07:29PM I had water running down hill under my home that was starting to wash out the foundation system. We installed a French Drain on the high side of the house.
A French Drain is nothing more than a trench that goes across the end of the home where the water is coming from. Its depth will depend on the amount of water you want it to handle. At my place we trenched down about 5 feet.. put about a foot of drain field rock on the bottom... above that layer of rock we put perforated pipe with the holes pointing up. We extended the trench and pipe around to the low side of the house and let it break out of the ground at a steady drop. We covered the pipe with six inches of rock, then a layer of septic field sand filter paper, and then rock to the top. PLAN CUT VIEW OF FRENCH DRAIN
VIEW OF FRENCH DRAIN FROM THE TOP
FRENCH DRAIN WITH BASE ROCK AND PIPE
For more details see:
David Oxhandler webmaster@mobilehome.com Edited 6 time(s). Last edit at 08/06/2009 07:59PM by David Oxhandler. Sorry, only registered users may post in this forum.
Disclaimer: Opinions posted on these pages are those of the individual posters and do not necessarily represent the opinion of the Manufactured Housing Global Network or its management.
|
| ||||||||||||||
| Manufactured Homes | Mobile Homes | Park Models | Park Model Homes | Mobile Homes Texas |